Includes:

• Bilstein 6112 5th Gen 4Runner Adjustable Struts
• Bilstein 5160 5th Gen 4Runner Rear Shocks

6112 Standard Specifications

6112 Heavy-Duty Specifications

PN:  47-310025 Collapsed Length (in): 16.86 Extended Length (in): 21.65 Collapsed Length (mm): 428.3 Extended Length (mm): 550.0 Stroke/travel Length (in): 4.79 Internal Design: Monotube Finish: Dampers: Zinc Plated/Springs: Black Reservoir: No Body Design: Snap Ring Grooved Body (Coilover) Body Diameter (od): 2.65 in. Piston Diameter: 60mm Boot Included: No Replacement Mounting Kit: B4-KT1-Z452A00 Spring Seat Included: Yes Front Main Spring Rate (lbs/in): 600 Shaft Diameter: 18mm Circlip Location / Installation Guide Notes: Provides 0.7-3" Front Lift

PN: 47-311039 Collapsed Length (in): 16.86 Extended Length (in): 21.65 Collapsed Length (mm): 428.3 Extended Length (mm): 550.0 Stroke/travel Length (in): 4.79 Internal Design: Monotube Finish: Dampers: Zinc Plated/Springs: Black Reservoir: No Body Design: Snap Ring Grooved Body (Coilover) Body Diameter (od): 2.65 in. Piston Diameter: 60mm Boot Included: No Spring Seat Included: Yes Front Main Spring Rate (lbs/in): 700 Shaft Diameter: 18mm Circlip Location / Installation Guide Notes: Provides 1.5-2.6" Front Lift. For 150-200 lbs additional front weight.

 

Rear coils:

• OME 895: 2.0 inch lift - light coils
• OME 889: 2.5-3.0 inch lift  - medium weight 100-300lbs
• OME 898: 3.0-3.5 inch lift - no weight, 2.5 inch lift - 400lbs constant weight
• OME 899: 2.5-3.0 inch lift - HD Springs 400-800lbs constant weight

Options:

• Assembled: Want a ready-to-install front strut? This is the option you need!
• Front Diff Drop Kit: Corrects 4WD CV angles by lowering your front differential (not required but recommended)
• Upper Control Arms: Replace that worn-out upper ball joint with a brand-new upper control arm and uni-ball design. We offer four of the top brands in the industry
• Panhard Correction Kit: Corrects your rear suspension geometry after lifting your 4Runner
• SRQ Swag Pack: This sweet pack includes decals, an SRQ shirt, and an SRQ bottle opener!

Notes:

• Kits come unassembled unless an assembly option selected. You can reuse your stock tophat and stem bushing/washers for installation on unassembled kits.
• All lift figures are based on lift averages, your exact setup may vary. We have no control over the total height the lift achieves on your specific vehicle
• 2WD lift heights may vary from estimated heights as the front end is lighter